E1FX Cable Gland

E-mail Print

E1FX Cable Gland

E1FX Tri-Star Flameproof Ex d, Increased Safety Ex e and Restricted Breathing Ex nR Cable Gland

CMP Type E1FX Tri-Star Triple Certified Flameproof (Type 'd'), Increased Safety (Type 'e') and Restricted Breathing (Type 'nR') indoor and outdoor cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Braided, Pliable Wire Armour (PWA), Strip Armour and Steel Tape Armour (STA) cable.

This cable gland provides a Flameproof seal on the cable inner bedding and in addition the gas tight seal has been tested to prove compatibility with Restricted Breathing equipment. The cable gland allows mechanical cable retention and earth continuity via the cable armour termination. Separate tightening actions for the inner displacement seal and the armour termination afford maximum control over the pressure applied to cable bedding, and also allows the effectiveness of the gas tight seal to be tested. A detachable armour cone and AnyWay clamping ring arrangement facilitates remote make off and enables the cable to be disconnected from the equipment. An environmental / load retention seal is provided on the cable outer sheath.

The CMP E1FX Tri-Star Cable Gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.

E1FX Cable Gland

Cable Gland Selection Table

Cable Gland Size Available Entry Threads Min Thread Length Cable Bedding Diameter Overall Cable Diameter Armour Range + Across Flats Across Corners Protrusion Length Ordering Reference (Brass Metric) # PVC Shroud Ref * Cable Gland Weight (Kgs)
Standard Option Min Max Min Max Min Max Max Max
Metric NPT NPT
20S/16 M20 1/2" 3/4" 15.0 3.1 8.6 6.1 11.5 0.0 1.0 24.0 25.9 58.5 20S16E1FX1RA PVC04 0.158
20S M20 1/2" 3/4" 15.0 6.1 11.6 9.5 15.9 0.0 1.0 24.0 25.9 58.5 20SE1FX1RA PVC04 0.158
20 M20 1/2" 3/4" 15.0 6.5 13.9 12.5 20.9 0.0 1.0 30.5 32.9 60.5 20E1FX1RA PVC06 0.208
25S M25 3/4" 1" 15.0 11.1 19.9 14.0 22.0 0.0 1.0 37.5 40.5 67.5 25SE1X1RA PVC09 0.330
25 M25 3/4" 1" 15.0 11.1 19.9 18.2 26.2 0.0 1.0 37.5 40.5 67.5 25E1FX1RA PVC09 0.330
32 M32 1" 1 1/4" 15.0 17.0 26.2 23.7 33.9 0.0 1.0 46.0 49.7 69.5 32E1FX1RA PVC11 0.463
40 M40 1 1/4" 1 1/2" 15.0 22.0 32.1 27.9 40.4 0.0 1.0 55.0 59.4 78.0 40E1FX1RA PVC15 0.671
50S M50 1 1/2" 2" 15.0 29.5 38.1 35.2 46.7 0.0 1.0 60.0 64.8 75.5 50SE1FX1RA PVC18 0.760
50 M50 2" 2 1/2" 15.0 35.6 44.0 40.4 53.1 0.0 1.0 70.0 75.6 80.5 50E1FX1RA PVC21 0.777
63S M63 2" 2 1/2" 15.0 40.1 49.9 45.6 59.4 0.0 1.0 75.0 81.0 91.5 63SE1FX1RA PVC23 1.369
63 M63 2 1/2" 3" 15.0 47.2 55.9 54.6 65.9 0.0 1.0 80.0 86.4 92.0 63E1FX1RA PVC25 1.472
75S M75 2 1/2" 3" 15.0 52.8 61.9 59.0 72.1 0.0 1.0 89.0 96.1 99.0 75SE1FX1RA PVC28 2.119
75 M75 3" 3 1/2" 15.0 59.1 67.9 66.7 78.5 0.0 1.0 99.0 106.9 102.0 75E1FX1RA PVC30 2.688
90 M90 3 1/2" 4" 15.0 66.6 79.9 76.2 90.4 0.0 1.6 114.0 123.1 120.0 90E1FX1RA PVC32 4.281
100 M100 - - 15.0 76.0 90.9 86.1 101.5 0.0 1.6 123.0 132.8 148.0 100E1FX1RA 150/50HST 4.674
115 M115 - - 15.0 86.0 97.9 101.5 110.3 0.0 1.6 133.4 144.1 169.0 115E1FX1RA 180/60HST 7.085
130 M130 - - 15.0 97.0 114.9 114.2 123.3 0.0 1.6 146.1 157.8 183.0 130E1FX1RA 180/60HST 8.382
Dimensions are displayed in millimetres unless otherwise stated

For more information please contact us at This e-mail address is being protected from spambots. You need JavaScript enabled to view it

 

Certifications: Intertek Testing Services US Coast Guard Certification Det Norske Veritas ABS Type Approval Program CSA International ISO